iFlight Borg Mini H7 with ELRS + R 60A BL32 stack for drones
iFlight Borg Mini H7 with ELRS + 60R BL32 is a combination of a flight controller with an integrated ELRS receiver and a powerful 60A ESC. The stack has 20×20mm mounting holes, making it suitable for 5″ racing and freestyle drones powered by 4–8S Lipo and LiHV batteries.
Borg Mini H7 is a flight controller with a powerful STM32H743 processor. It also features an ICM42688 gyro, SPA06-003 barometer for altitude measurement, and 32MB of Blackbox memory. The board includes 6 UARTs, an I2C bus for connecting a compass, and an integrated controller for LED strips. At each corner of the flight controller there are connectors for easy LED strip connection without complicated wiring. The LED strips are then connected in parallel. A 5V/2.5A and 12V/2A BEC are also available. A major advantage is the controllable 12V BEC, which is used to power the video transmitter. The video transmitter can therefore be turned off through the flight controller and prevent overheating while waiting for GPS satellites. The board has a full-featured integrated ELRS receiver at 2.4GHz with telemetry output up to 100mW. The antenna is connected via an IPEX1 connector.
iFlight Borg 60R ESCs handle up to 60 A and use BLHeli_32 firmware, which supports telemetry, bidirectional dshot and variable PWM frequency. The ESC also includes a protective TVS diode, an anti-spark system that prevents sparking in the connector when the battery is connected, and integrated polymer capacitors. An external electrolytic capacitor is therefore not required.
The letter R in the ESC name indicates that the ESCs have motor solder pads routed diagonally.
An FPC cable is used to connect the FC to the ESC. To maintain compatibility with FCs and ESCs from other manufacturers, solder pads are available on the ESC, and for the FC there is a standard 8-pin connector.
Key Features
- Input voltage: 4–8S (LiHV)
- MCU: STM32H743VIH6
- Gyro: ICM42688
- OSD: AT7456E
- Blackbox: 32 MB
- Barometer: SPA06-003
- I2C: Yes
- Number of UARTs: 6
- BEC: 5V/2.5A, 12V/2A
- Receiver: ELRS 2.4GHz UART
- Antenna connector: IPEX1 (u.FL)
- ELRS target: iFlight2.4GHz_2400_RX
- ESC firmware: BLHeli_32
- Maximum current: 60 A
- Current sensor: No
- Protective TVS diode: Yes
- Integrated capacitors: Polymer
- Anti-spark: Yes
- Mounting holes: 20×20 mm M4 (M3 with softmount)
- FC dimensions: 36x27mm
- ESC dimensions: 45x52mm
- FC weight: 6.7 g
- ESC weight: 15.5 g
Package Includes
- 1x iFlight Borg Mini H7 flight controller
- 1x iFlight Borg 60R ESC (4-in-1)
- 1x cable set
- 1x softmount set
- 1x XT60 connector with cable


















































































All DJI Drones
DJI Lito
DJI Mini 5 Pro
DJI Neo 2
DJI Neo
DJI Avatar 360
DJI Avatar 2
DJI Mavic 3 Pro
DJI Air 2S
DJI Avatar
DJI FPV
DJI Mini 3 Pro
DJI Care Refresh Plans
DJI Matrix 4
DJI Matrice 400
DJI Dock
DJI Mavic 3 Enterprise
DJI FLYCART 30
DJI FlyCart 100 CARGO TRANSPORT DRONE
Software for industrial drones
Professional cameras
Antigravity A1
Kids drones
Детски дронове и дронове за начинаещи
Drone batteries
Drone housings
Drone legs
Motors/Gears
Drone Fins / Propellers
Fin guards
Chargers
FPV drones
FPV drones
FPV parts
FPV видео антени
Аналогови FPV камери
FPV Батерии
Аналогови VTX
Digital FPV systems
Кабели и конектори
FPV Зарядни
Tools
Крепежни елементи
FPV Мотори
FPV Перки
Радио Приемници и Антени
Дистанционни и модули
FPV Рамки
FC / ESC / Stacks
FPV GPS Модули
FPV Чанти и кейсове
Airplanes
DJI Osmo 360
DJI Osmo Action 6
DJI Osmo Action 4
DJI Mic Mini 2S
DJI Osmo Pocket 4/4Pro
DJI Osmo Pocket 3
DJI Osmo Mobile 8/8P
DJI Osmo Mobile 7
DJI Ronin RS 4 PRO
DJI Ronin RS 3 Pro
DJI RS3 Mini
DJI Ronin 4D
Insta360 X6
Insta360 Luna
Insta360 X4
Insta360 Flow 2 Pro
Insta360 GO 3/3S
Other insta360 cameras
Spare parts for DJI Tello
Spare parts for DJI NEO / NEO 2
Spare parts for DJI Avata / Avata 2
Spare parts for DJI Spark

Drone football (DroneBALL)



Reviews
There are no reviews yet