NewBeeDrone Hummingbird 200 ESC RaceSpec 80A 6S AM32 4-in-1 ESC for racing FPV drones
NewBeeDrone Hummingbird 200 ESC RaceSpec 80A 3-6S AM32 is a compact 4-in-1 ESC with 20×20 mm mounting pattern, suitable for racing 5″ FPV drones. The ESC supports 3-6S LiPo batteries. It was developed in collaboration with racing pilot Kyle Buell (Twidgit) and addresses common racer issues: MOSFET overheating, torn solder pads after crashes, and oversized ESCs that do not fit racing frames.
The ESC is built on a 6-layer PCB with 3 oz copper, blind vias and a gold-plated finish, which helps dissipate heat and increases the board’s mechanical durability. A pair of integrated TVS diodes protects the electronics against voltage spikes without the need for external components. The board comes with a protective nano coating applied at the factory.
A notable feature is the 3D motor pad design — each pad wraps around the top, bottom, and side of the board. The wire is inserted into a semicircular cutout and soldered from both the top and bottom, making the connection significantly stronger and preventing the pad from tearing off even in a hard crash or with a broken arm. The BAT+ and BAT- power pads are reinforced for high currents. A 1000 µF electrolytic capacitor is included and recommended to be soldered to the power leads.
The ESC is based on an AT32F421 processor with an integrated MOSFET driver. It uses open-source AM32 firmware with adjustable output PWM frequency and features a current sensor. It connects to the flight controller via an 8-pin JST-SH 1.0 connector.
Key Features
- Input voltage: 3-6S LiPo
- MCU: AT32F421
- Firmware: AM32
- Continuous current: 80A
- Current sensor: Yes
- TVS diode protection: Yes
- PCB: 6 layers, 3 oz copper, gold-plated finish
- Motor pads: 3D (top, bottom, and side)
- FC connector: 8-pin JST-SH 1.0
- Mounting holes: 20×20 mm M3
- Dimensions: 35×45 mm (including solder pads)
- Weight: 13.9 g (without cables and capacitor)
Package Includes
- 1x ESC
- 1x 1000 µF capacitor
- 1x XT60 connector
- 1x 14 AWG power cable
- 1x 8-pin connection cable (100 mm)
- 5x Soft mount
- 2x Heat shrink tubing for capacitor









































































Всички DJI Дронове
DJI Lito
DJI Mini 5 Pro
DJI Neo 2
DJI Neo
DJI Avata 360
DJI Avata 2
DJI Mavic 3 Pro
DJI Air 2S
DJI Avata
DJI FPV
DJI Mini 3 Pro
DJI Care Refresh Планове
DJI Matrice 5
DJI Matrice 4
DJI Matrice 400
DJI Dock
DJI Mavic 3 Enterprise
DJI FLYCART 30
DJI FlyCart 100 ТОВАРЕН ТРАНСПОРТЕН ДРОН
Софтуер за индустриални дронове
Професионални камери
Antigravity A1
Детски дронове
Детски дронове и дронове за начинаещи
Батерии за дронове
Корпуси за дронове
Крака за дронове
Мотори/Зъбни колела
Перки / Витла за дронове
Предпазители за перки
Зарядни устройства
FPV дронове
FPV дронове
FPV части
FPV видео антени
Аналогови FPV камери
FPV Батерии
Аналогови VTX
Дигитални FPV системи
Кабели и конектори
FPV Зарядни
Инструменти
Крепежни елементи
FPV Мотори
FPV Перки
Радио Приемници и Антени
Дистанционни и модули
FPV Рамки
FC / ESC / Stacks
FPV GPS Модули
FPV Чанти и кейсове
Самолети
DJI Osmo 360
DJI Osmo Action 6
DJI Osmo Action 4
DJI Mic Mini 2S
DJI Osmo Pocket 4/4Pro
DJI Osmo Pocket 3
DJI Osmo Mobile 8/8P
DJI Osmo Mobile 7
DJI Ronin RS 4 PRO
DJI Ronin RS 3 Pro
DJI RS3 Mini
DJI Ronin 4D
Insta360 X6
Insta360 Luna
Insta360 X4
Insta360 Flow 2 Pro
Insta360 GO 3/3S
Други камери insta360
Резервни части за DJI Tello
Резервни части за DJI NEO / NEO 2
Резервни части за DJI Avata / Avata 2
Резервни части за DJI Spark

Дрон футбол (DroneBALL)




Отзиви
Все още няма отзиви